Why Do The Printing Industry Need Sink Defoamer?

The sink liquid defoamer is used in the printing industry. When using the bath liquid, foaming problems will occur. These foams directly affect the quality of the printing. How to solve the foam problem depends on the sink liquid defoamer to solve the problem. .

Sink liquid defoamer applied during printing

The sink liquid defoaming agent has excellent defoaming and antifoaming functions for fine foam, and has the advantages of less dosage, long foam inhibition time, water dispersibility, excellent suction force, and extremely low surface tension. This product has good compatibility, does not float oil production and does not produce shrinkage holes, fish eyes and other phenomena.

Features of the sink liquid defoamer:

1. Defoaming and foam suppression are strong, and the dosage is small, which does not affect the basic properties of the foaming system.

2, good heat resistance, chemical stability, no corrosion, no toxicity, no adverse side effects, non-combustible, no explosion.

3, its performance can be comparable with imported products, and the price has a more obvious advantage.

Technical specifications of the sink liquid:

Model: E-208/209/210

Appearance: Light yellow liquid / milky white liquid

pH: 5~8

Active content 50~99%

usage instructions:

Recommended dosage: The amount of defoamer added to the tank is 0.1~0.8c/o of the total volume, but the most economical dosage should be determined after the process test; it can also be mixed with other powder additives.

The Central Federal Desiccant Defoamer quickly removes foam from the surface and has no effect on metal cutting. China Federation is a defoamer manufacturer with 16 years of application experience. We are very mature in the technology of defoamer. If you want to know more defoamer products, please call our hotline: +86 13929201380.

This article is from the manufacturer of Zilibon defoamer (http://www.zilibon.com/), please indicate the source if you need to reprint.