How To Choose The Best Metalworking Fluid Defoamer?

Nowadays, there are many types of metalworking fluid defoamers in the market. Many metalworking fluid producers have many concerns in choosing defoamers. If you don't know what kind of defoamer is needed for metal cutting, then the following is appropriate. The selection and use of metal defoamers is described by Zilibon.

Cutting fluid defoamer for metal cutting

Cutting fluid is the most important additive in the process of metal cutting. It can improve the cutting efficiency, improve the precision and reduce the surface roughness of the work. It can also extend the service life of the tool and help the best results when cutting. While using the cutting fluid, a large amount of foam is produced on the surface of the cutting fluid. There are three main reasons for the foam: 1 The foam 2 caused by the liquid level of the cutting fluid is too fast, and the flow is too fast. There is no way to overflow more and more, resulting in a large amount of foam. There is no way to eliminate the 3 right angles in the design of the sink, or the nozzle angle of the cutting fluid is too straight to cause foam.

The manufacturer's concerns or concerns are: the use of these defoamers will not be effective, anti-foaming is not durable, there are phenomena such as precipitation and floating oil.

After understanding the concerns of the manufacturers, Zilibon has launched a defoamer product that perfectly solves the problem of metal cutting liquid foaming. It is made up of special modified polyether and fluorine-containing raw materials through a special process, which is very soluble in water. It is especially suitable for defoaming and foam suppression under the conditions of high temperature, strong acid and alkali, high shear force and high pressure. It has excellent high temperature resistance, acid and alkali resistance, no floating, no bleaching oil; it can be widely used in foam elimination and suppression of various harsh systems over a wide temperature range.

Zilibon defoamer has been used in China for 16 years and is very mature in defoaming technology. Even the contrast of imported defoamers is not inferior. Zilibon has a team of outstanding engineers and an independent laboratory base. If you want to know more about defoamer products, please call our hotline: +86 13929201380.

This article is from the manufacturer of Zilibon defoamer (http://www.zilibon.com/). Please indicate the source if you need to reprint.