How to deal with the foam generated during the paint production process?

The use of water-based paints is gradually increasing, and its advantages are particularly obvious. More and more manufacturers are investing in production and R&D, but in the production process, a large amount of foam is often generated, which greatly affects the efficiency of production and equipment. At this time, we need to use It is a defoamer for coatings.

  There are two types of water-based paints: latex paint and water-soluble paint. There are three main types of paint: vinyl acetate type, butylbenzene type and acrylic type, which are obtained by adding pigment slurry to the obtained latex after emulsion polymerization. . In the process of mixing and blending, it is often violently foamed. Foaming causes volume expansion, which reduces the utilization of the conditioning equipment.

Guangdong Zilibon Fine Chemical Co., Ltd. is a manufacturer specializing in R&D, production and sales of defoamers. We have a strong R&D team and equipment, and a 24-hour multi-language translation service team to better solve your bubble Problem, customize the best solution.

  Our defoamers for coatings are organic polyetheresters, mineral oils, and alcohol-based composites that have been specially refined. It has the characteristics of self-emulsification, easy dispersion, strong versatility, good defoaming and long-lasting foam suppression. It does not cause surface defects or affects film formation, and has a special effect on aqueous coating systems.

  If you need any help, please click on the message form below or contact us directly. -Contact us-