FeedBack

The desulfurization tower defoaming agent is specially developed for the flue gas desulfurization slurry foaming system. It has transparency, good compatibility, and fast defoaming and foam suppression performance, thereby controlling the liquid level in the tower and removing the false high liquid level caused by foam. Prevent slurry from overflowing and slow down the scaling and clogging of the heat exchanger (GGH) caused by foam.

1. Does not affect the basic properties of the foaming system, has strong defoaming and foam suppression capabilities, and requires a small dosage.
2. Good diffusion, permeability, heat resistance and strong oxidation resistance.
3. Chemically stable, non-physiologically active, non-corrosive, non-flammable and non-explosive.
4. Can be used in strong acids, alkalis, electrolytes and hard water.
5. Does not affect the operation of the desulfurization system and gas emission indicators.

The desulfurization tower defoaming agent is specially developed for foaming the slurry in the flue gas desulfurization absorption tower. It is only used for defoaming the desulfurization slurry. It has a significant effect in suppressing foaming and overflow in the absorption tower and preventing slurry backflow at the entrance of the absorption tower. It is obviously superior. to other defoaming agents.

Recommended dosage: Use the desulfurization tower defoamer directly; generally, the addition amount of desulfurization tower defoamer is 0.1~0.3% of the total foaming system. Please test the specific dosage.

Packaging: This product is packaged in 50/60/150/200/1000KG plastic barrels.

Storage: This product is non-flammable and explosive. Store it in a cool, sheltered place and keep it airtight. The storage period is one year, with no obvious stratification.

Transportation: This product must be sealed during transportation to prevent moisture, strong alkali, strong acid, rainwater and other impurities from being mixed in.